Specifications and requirements
10
Maximum generator output:
25 A
Drive unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
F100DET 2.27(25/11)
F80BET 2.27(25/11)
F80CED 2.15(28/13)
Trim and tilt system:
F100DET Power trim and tilt
F80BET Power trim and tilt
F80CED Hydro tilt
Propeller mark:
F100DET K
F80BET K
F80CED K
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. research octane number:
90
Fuel tank capacity:
25 L (6.61 US gal, 5.50 Imp.gal)
Recommended engine oil:
4-stroke outboard motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter
replacement):
3.5 L (3.70 US qt, 3.08 Imp.qt)
Engine oil quantity (with oil filter
replacement):
3.7 L (3.91 US qt, 3.26 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
F100DET 0.670 L (0.708 US qt,
0.590 Imp.qt)
F80BET 0.670 L (0.708 US qt,
0.590 Imp.qt)
F80CED 0.760 L (0.803 US qt,
0.669 Imp.qt)
Tightening torque for engine:
Spark plug:
25 Nm (2.55 kgf-m, 18.4 ft-lb)
Propeller nut:
F100DET 35 Nm (3.57 kgf-m, 25.8 ft-lb)
F80BET 35 Nm (3.57 kgf-m, 25.8 ft-lb)
F80CED 55 Nm (5.61 kgf-m, 40.6 ft-lb)
Engine oil drain bolt:
28 Nm (2.86 kgf-m, 20.7 ft-lb)
Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
Noise and vibration level:
Operator sound pressure level:
73.2 dB(A)
EMU33554
Installation requirements
EMU33564
Boat horsepower rating
WARNING
EWM01560
Overpowering a boat can cause severe in-
stability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boats
maximum horsepower rating. See the boat’s
capacity plate or contact the manufacturer.
EMU33571
Mounting motor
WARNING
EWM01570
●
Improper mounting of the outboard mo-
tor could result in hazardous conditions
such as poor handling, loss of control,
or fire hazards.
U6D779E0.book Page 10 Tuesday, November 15, 2011 2:33 PM
