manualshive.com logo in svg

Yamaha EX5, Owner'S Manual

The Yamaha EX5 is a powerful synthesizer designed for professional musicians. Discover its limitless possibilities with the comprehensive Owner's Manual, available for free download at manualshive.com. Unlock the full potential of your EX5 and explore its advanced features with this essential manual.

Share
Download
background image

Arpeggio Mode

245

Arpeggio Record

Mode

In Arpeggio Record mode there are two methods
available for recording arpeggio sequence data, real
time recording and step recording. There are also
various functions related to recording arpeggios and a
maximum of 50 arpeggios, each of which are
accompanied with the settings in Arpeggio Mode
screen, can be stored in the internal memory. For
organizing your arpeggios, they can be stored to floppy
disk so that you can make use of them whenever you
like.

Real Time Recording: Just like a multi-track recorder,
the actual performance is recorded as you play. Because
the performance is recorded exactly as played, the
subtle nuances and feeling of the recording are
accurately expressed.

Step Recording: Just like writing music on a music
score, each note is programmed in separately. You can
confirm each beat of the measure in the screen as you
perform operations. Therefore this type of recording is
perfect for programming repetitive phrases and bass
lines that require precision.

Arpeggiator will use the sequence data recorded here as
its basic patterns. An arpeggio consists of four tracks.
The arpeggio tracks, pattern tracks and song tracks
share the same 16 parts of the tone generator. The
MIDI channels for each arpeggio track can be set in
Arp CH parameter of the Voice Mode Setup in Voice
mode and of the COM menu in Performance mode,
respectively.

The arpeggio sequencer doesn’t read the messages of the
program change and system exclusive.

How to Enter the Arpeggio
Record Mode

When in the Arpeggio Mode screen, press the
sequencer [REC] (Recording) key. The [REC] light will
be lit indicating that Arpeggio Record mode has been
engaged, and is now in standby status.

Press [REC] once more or [STOP] to return to
Arpeggio Mode screen. 

When you enter the Arpeggio Record mode, the sub
menus below appear in the screen. There are four
menus in the Arpeggio Record mode. 

[F1]: ARP(Settings related to recording arpeggios)

Recording Mode

[F5]: STEP (Selecting Step recording)
[F6]: OVER (Select Overdubbing)
[F7]: RPLC (Selecting Replace recording)

[F1]: ARP (Arpeggio)

These are various settings related to recording an
arpeggio, such as selecting a track for recording, and
setting the time signature and tempo. In addition to
those settings, there are Mute on/off and Play Effects
Thru on/off for each of the playback tracks (tracks
1~4). 

Many of the parameters here are found in Arpeggio
Mode screen (page 238). Only the parameters that
differ from those described in Arpeggio Mode screen
will be explained.

F1

F5

F6

F7

 Arpeggio/E/qx  5/21/98  11:50 AM  Page 245

Summary of Contents for EX5

















































































































































































































































































































Reviews:

No comments

Related manuals for EX5

Generalmusic GEM GK 340 Owner'S Manual preview
GEM GK 340
Brand: Generalmusic Pages: 24
ZIPPY RF666C User Manual preview
RF666C
Brand: ZIPPY Pages: 5
Ectaco Partner EAl400T User Manual preview
Partner EAl400T
Brand: Ectaco Pages: 22
JARLTECH 8010M Operation Manual preview
8010M
Brand: JARLTECH Pages: 52
LifeFitness DISCOVER CONSOLE Operation Manual preview
DISCOVER CONSOLE
Brand: LifeFitness Pages: 79
WAGNER Evobell 3500 Translation Of The Original Operating Manual preview
Evobell 3500
Brand: WAGNER Pages: 88
D-MAX DCK-500B User Manual preview
DCK-500B
Brand: D-MAX Pages: 47
XUMA CKF-112G Manual preview
CKF-112G
Brand: XUMA Pages: 8
Techly IDATA KB-300W User Manual preview
IDATA KB-300W
Brand: Techly Pages: 12
UWELL CALIBURN A2S User Manual preview
CALIBURN A2S
Brand: UWELL Pages: 68
Zoom BLUETOOTH WIRELESS KEYBOARD Quick Start preview
BLUETOOTH WIRELESS KEYBOARD
Brand: Zoom Pages: 5
schwa-medico EMP 2 PRO Operating Instructions Manual preview
EMP 2 PRO
Brand: schwa-medico Pages: 28
Franklin BOOKMAN SCD-770 User Manual preview
BOOKMAN SCD-770
Brand: Franklin Pages: 29
KAP MB 2010 PAS DC3 Instruction Manual preview
MB 2010 PAS DC3
Brand: KAP Pages: 38
perixx PERIBOARD User Manual preview
PERIBOARD
Brand: perixx Pages: 21
Targus PA760U User Manual preview
PA760U
Brand: Targus Pages: 21
perixx PERIBOARD-333 User Manual preview
PERIBOARD-333
Brand: perixx Pages: 21
Franklin TDP-590 User Manual preview
TDP-590
Brand: Franklin Pages: 44

Brands by name

Popular brands

Load more brands