215
Song Mode
■
Track
Sets the track where Move Clock will be executed.
❏
Settings:
1~16 (Sequence tracks 1~16), pfx, tempo
■
Measure
Sets the measure range (beginning measure to the
end measure) where Move Clock is executed.
❏
Settings:
001~999 (for the beginning measure and the
end measure)
■
Clock
Sets the distance that data is moved forward or
backward. Note that there are 480 clock per beat
when setting the distance that the data will be
moved.
❏
Settings:
–9999~+0~+9999
3. Modify GateTime
This job alters the gate time of the notes in the
specified range. The gate time indicates the length of
time that a note is held. For sustained voices, the gate
time is equal to the actual playback time span. You can
modify the gate time using two types of parameters: the
Rate and Offset.
The modified gate time will be obtained based on the
formula below.
Modified gate time = original gate time
x
Rate +
Offset value
The gate time value doesn’t exceed the lower limit,1.
■
Track
Sets the track where Modify GateTime will be
executed.
❏
Settings:
1~16 (Sequence tracks 1~16)
■
Measure
Sets the measure range (beginning measure to the
end measure) where Modify Gate Time is executed.
❏
Settings:
001~999 (for the beginning measure and the
end measure)
■
Rate
Increases or decreases the gate time of all notes in
the designated range by multiplying the Rate value.
A setting of 100% produces no change. A setting less
than 100% will produce a shorter gate time, whereas
a setting above 100% produces a longer gate time.
❏
Settings:
000%~100%~200%
■
Offset
Increases or decreases the gate time of all notes in
the designated range by adding the Offset value. A
setting of 0 produces no change. Negative values
decrease the gate time, while positive values increase
it.
❏
Settings:
–9999~+0~+9999
Original Data
32
(Gate)
(Gate)
(Gate)
32
32
48
48
Offset=–20
12
12
12
28
28
20
52
52
52
68
68
Original Data
32
(Gate)
(Gate)
(Gate)
32
32
48
48
Gate time rate=50%
16
16
16
24
24
Gate time rate=150%
48
48
48
72
72
Song/E/qx 5/21/98 11:41 AM Page 215
