Yamaha EMX 5000-12, Service Manual

Page: 40 / 124

EMX5000-12/20
40
1-6 MASTER
GRAPHIC EQUALIZER GAIN control CENTER
GRAPHIC EQUALIZER ON switch OFF
AUX (1, 2), MONO OUT, ST OUT PFL switch OFF
ST OUT AFL switch OFF
MONO OUT LPF ON/OFF switch OFF
MONO OUT LPF FREQ control MINIMUM
PHONES, ST SUB OUT level control MAXIMUM
ST1, MONO, MONITOR (1, 2), EFFECT fader MAXIMUM
AUX (1, 2), MONO OUT, ST OUT fader MAXIMUM
1-7 PHANTOM
PHANTOM switch OFF
1-8 POWER AMP
SIGNAL SELECT switch ST (L, R)
POWER SELECT switch 500W
1-9 YAMAHA SPEAKER PROCESSING switch OFF
1-10 STAND-BY switch OFF
*1: Turn on the PFL switch of the channel to which the signal was input.
2 GAIN
• In the state as described in 1 above, check that the output level within the range specified in Tables 2-1 to 2-5 can be
obtained at each output terminal.
*1: Turn on the PFL switch of the channel to which the signal was input.
[Table 2-2] Input terminal [INPUT CH1-8: EMX5000-12 / 1-16: EMX5000-20] [Unit: dBs]
INPUT INPUT LEVEL ST OUT (L,R) REC OUT (L,R) PHONES (L,R) *1
INSERT IN -20 +1
±
2 +20.8
±
2 -11
±
2
INPUT INPUT GAIN INSERT ST OUT ST SUB MONO AUX 1,2 SEND AUX 1,2 SEND EFFECT 1,2
LEVEL OUT (L,R) OUT (L,R) OUT (POST SW OFF) (POST SW ON) SEND
-80 MAX. -20
±
2 +1
±
2 -3
±
2 +4
±
2 0
±
2 +10
±
2 0
±
2
INPUT A -54
MAX. – +1
±
2 – – – – –
(26dB ON)
-36 MIN. – +1
±
2 – – – – –
INPUT B -80 MAX. – +1
±
2 – – – – –
[Table 2-1] Input terminal [INPUT CH1-8: EMX5000-12 / 1-16: EMX5000-20] [Unit: dBs]
[Table 2-3] Input terminal [ST INPUT CH9-12: EMX5000-12 / 17-20: EMX5000-20] [Unit: dBs]
INPUT INPUT GAIN ST OUT ST OUT AUX 1,2 SEND AUX 1,2 SEND EFFECT 1,2 PHONES
LEVEL L R (POST SW OFF) (POST SW ON) SEND (L, R) *1
9/11L
17/19L -54 MAX. +1
±
2 – -3
±
2 +7
±
2 -3
±
2 -11
±
2
(PHONE)
(L)
10/12R
18/20R -54 MAX. – +1
±
2 -3
±
2 +7
±
2 -3
±
2 -11
±
2
(PHONE)
(R)
9/11L
17/19L -54 MAX. +1
±
2 – – – – –
(PIN)
10/12R
18/20R -54 MAX. – +1
±
2 – – – –
(PIN)