manualshive.com logo in svg

Yamaha Electone Stagea ELS-01, Owner'S Manual, Page: 96 / 252

Share
Download
Yamaha Electone Stagea ELS-01 Owner'S Manual Download Page 96

ELS-01/01C Owner’s Manual

96

Music Data Recorder (MDR)

7

The M.D.R. display consists of two display pages: the SONG Page and the TOOLS 
Page. In the SONG Page, you can select a song, then play it back or record it. The 
TOOLS Page has a variety of song utility operations, such as copy, delete, rename, etc.
Pressing the [SONG] or [TOOLS] button at the top right of the display switches 
between the SONG Page and the TOOLS Page.

1

 Current Media/Folder

Displays the currently selected media and folder(s). The left side of the indication 
(before “:/”) shows the particular media and the right side shows the path with 
currently selected folder name at the end. For example, “USB 01:/Folder1/” indicates 
that the folder named “Folder1” contained in the USB flash memory is selected.

2

 Media/Folder/Song List

Displays the media, folders or songs. Up to 120 folders can be displayed (5 folders at 
once).

3

 Scroll Buttons

If the Media/folder/Song List contains more than 5 media/folders/songs, you can scroll 
through the display with these buttons.

4

 SETTINGS

Displays/changes the settings for the currently selected song.

5

 UP

Selects the higher layer folder or media. For example, when “USB 01:/Folder1/” 
(Folder1 in the USB flash memory) is selected, pressing the [UP] button selects “USB 
01:/” (USB flash memory).

2

Using the LCD Display

1

7

8

9

)

@

#

$

%

^

&

!

2

3

5

5

4

6

SONG Page

TOOLS Page

Reference Page

Setting a song (page 104)

Summary of Contents for Electone Stagea ELS-01





























































































































































































































































Reviews:

No comments