ELS-01/01C Owner’s Manual
62
5
Rhythm/Keyboard Percussion
Adjust the volume and amount of reverb applied to the
Accompaniment.
Pressing the same rhythm button on the panel again calls up the Rhythm
Condition display.
The two sliders at the right side of the display can control the Accompaniment
volume and reverb. Touch the slider in the display or use the Data Control dial
to adjust the volume/reverb.
The Auto Bass Chord (A.B.C.) function works with the Rhythm section of the
Electone to automatically produce bass accompaniment as you play. It adds an entirely
new dimension to your performance by effectively putting a full backing band at your
disposal. There are three modes used for producing Automatic Accompaniment
patterns.
Before using the A.B.C. function, turn Pedal Poly off. If Pedal Poly is set to on, the bass
pattern of the A.B.C. will not sound.
To set the A.B.C. function:
Press the [A.B.C./M.O.C.] button.
The A.B.C./M.O.C. display appears. The A.B.C. section is at the left half of this display.
5
Automatic Accompaniment
– Auto Bass Chord (A.B.C.)
3
DATA CONTROL
Reference Page
POLY (page 40)
DISPLAY SELECT
VOICE
DISPLAY
FOOT
SWITCH
RHYTHM
PROGRAM
UTILITY
INTERNET
A.B.C.
M.O.C.
MDR
VOICE EDIT PATTERN SEQUENCE
U.ORGAN
FLUTES
L.ORGAN
FLUTES
ROTARY SP
SPEED
1
2
A.B.C./M.O.C. Display