ELS-01/01C Owner’s Manual
54
5
Rhythm/Keyboard Percussion
INTRO
Pressing one of the INTRO [1] – [3] buttons automatically adds a
short introduction before starting the actual (Main) rhythm.
First press one of the INTRO [1] – [3] buttons, then press the
[START] or [SYNCHRO START] button to actually start the
rhythm.
While the introduction is playing, the BAR/BEAT display
shows the countdown to the first measure of the pattern.
For example, if there is a four-measure lead-in for a pattern
in 4/4 time, the display at right appears:
ENDING
Pressing one of the ENDING [1] – [3] buttons automatically
adds an ending phrase before stopping the rhythm.
When you press the Ending button while rhythm is playing
back, the rhythm will automatically stop after the ending
phrase is played. You can have the ending gradually slow down
(ritardando) by pressing the ENDING button once again,
while the ending is playing.
To switch the rhythm sections:
You can change the rhythm section of the Main phrase by pressing the desired MAIN/
FILL IN [A] – [D] button. The selected section’s lamp (above the button) is lit.
To use the Fill In patterns:
As you play the Electone along with the rhythm, occasionally press the selected MAIN/
FILL button as desired. The Fill In pattern (one measure) will be played and the
selected Fill In section’s lamp (above the button) flashes.
When you use the Auto Fill In function, Fill Ins will be played automatically. The Auto
Fill In function is set in the Rhythm Condition display.
Pressing the selected Rhythm button on the panel again (or pressing the rhythm name
of the selected rhythm in the display) calls up the Rhythm Condition Display.
When Auto Fill is set to ON in the left side of the display, the Fill In pattern is
automatically played whenever you switch the Main sections.
1
2
3
INTRO
BAR / BEAT
TEMPO
NOTE
When an Intro or Ending
pattern is playing, the Lower
Keyboard cannot be played.
1
2
3
ENDING
NOTE
Pressing the ENDING [1]
button during playback of
the Main section will first call
up the fill in pattern, then the
Ending 1 pattern.
A
B
C
D
MAIN / FILL IN
NOTE
You can record the currently
selected section to
Registration Memory.
However, you cannot record
the on/off status of the Auto
Fill In function.
