Internet Direct Connection
12
ELS-01/01C Owner’s Manual
205
1
Access Point
Pressing the [Display Information] button calls up the access point list. It shows the
access points near the Electone.
Once you select the desired access point and press the [OK] button, a message appears
prompting confirmation of whether to transfer the access point settings to the Electone
or not. When you select [YES], the SSID, Channel and Encryption settings are
transferred to the Electone.
2
SSID
Determines the SSID setting.
3
Channel
Determines the channel.
4
Encryption
Determines whether or not the data is encrypted.
5
WEP key type / WEP key length / WEP key
These settings are available only when Encryption above is enabled. These set the type
and length of the encryption key.
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Others
1
Proxy server / Proxy port / Non-proxy server
Determines the proxy server name, port number and the host name for a main, non-
proxy server. The settings here are only necessary when using a proxy server.
2
Delete cookies
Deletes the contents of all saved cookies.
3
Delete all bookmarks
Deletes all saved bookmarks.
4
Initialize setup
Restores all settings in the Internet Settings displays to their defaults. See “Initializing
Internet Settings” on page 206.
5
Connection information
Shows detailed information on the current connection.
NOTE
An access point that is
encrypted in a non-WEP
format cannot be used.
NOTE
If no signal from the access
point is received, the access
point cannot be listed.
NOTE
The WEP key type, length
and WEP key are not entered
automatically. You have to
enter them by yourself if you
want to use an access point
that is encrypted.
2
3
4
5
1
NOTE
When using two or more non-
proxy servers, separate each
server name with a comma.
