ELS-01/01C Owner’s Manual
160
9
Rhythm Program
Set the appropriate Quantize value.
For details on the Quantize function, refer to page 156.
Set the Gate Time.
You can adjust the Gate Time setting by using the GATE TIME
buttons in the display, or the Data Control dial. Using the buttons in the display
makes coarse changes in the value. Using the Data Control dial makes fine
changes.
Enter the Rhythmic Chord pattern.
The methods for entering the Rhythmic Chord pattern are the same as those for
entering the rhythm pattern. Any key you press sounds a C major triad chord
(C, E, and G). For information on Step Write, see page 151; for information on
Real Time Write, see page 157.
You can also edit the entered Rhythmic Chord pattern using the same method as in
“Editing Entered Percussion Notes” (page 152). To change the gate time of the notes of
the Rhythmic Chord pattern, follow the instructions below.
Gate time determines the actual length of time a note sounds. For example, a
quarter note is sometimes played as tenuto (long length) and sometimes played as
staccato (short length).
Since 1 beat is made up of 480 clocks, a quarter note played tenuto may have a gate
time between 450 – 470, and a staccato quarter note may be about 240.
4
5
DATA CONTROL
6
