manualshive.com logo in svg

Yamaha Electone Stagea ELS-01, Owner'S Manual

The Yamaha Electone Stagea ELS-01 is an exceptional musical instrument offering limitless creativity. Unlock its full potential by referring to the comprehensive Owner's Manual, available for free download on our website. Explore its features and functions effortlessly with this detailed manual, enhancing your musical journey.

Share
Download
background image

ELS-01/01C Owner’s Manual

102

Music Data Recorder (MDR)

7

If you find that you are unable to use new, blank external media (such as floppy disks or 
USB flash memory) or old one that have been used with other devices, you may need 
to format them.
Formatting erases all the data in the media and makes it ready to record. The data 
erased by formatting will be lost permanently. Check whether or not the media 
contains any important data you wish to keep before executing the operation. Proceed 
with caution, especially when connecting multiple USB storage media.

Connect the media to the USB TO DEVICE terminal.

Press the [TOOLS] button at the top right of the display to call up 
the TOOLS  Page.

Press the 

 button repeatedly if necessary until the button 

is grayed out.

Select the desired media you want to format.

To format a USB flash memory, select [USB XX] (USB 01, USB 02, etc.). 
To format a floppy disk, select [USB-FD01].

Press the [FORMAT] button in the display.

A message appears, prompting confirmation of the operation. Select 
[FORMAT] to format the media, or [CANCEL] to abort the operation.

3

Formatting External Media

NOTE

Before purchasing a USB 
flash memory device, please 
consult your Yamaha dealer, 
or an authorized Yamaha 
distributor for advice, or see 
the Yamaha website (http://
www.yamahamusicsoft.com/).

1
2
3
4

NOTE

“USB-FD01” appears in the 
display only when a floppy 
disk drive has been installed 
to the Electone.

NOTE

The indications USB 1, USB 
2, etc. will be displayed 
depending on the number of 
the connected media.

5

Do not remove the media 

while formatting.

Summary of Contents for Electone Stagea ELS-01





























































































































































































































































Reviews:

No comments

Related manuals for Electone Stagea ELS-01

R-Go Numpad Break Manual preview
Numpad Break
Brand: R-Go Pages: 14
Panasonic FZ-VKBQ11 Series Operating Instructions preview
FZ-VKBQ11 Series
Brand: Panasonic Pages: 4
Panasonic SXKC600 - ELECTRONIC KEYBOARD Owner'S Manual preview
SXKC600 - ELECTRONIC KEYBOARD
Brand: Panasonic Pages: 48
Clavia Nord Modular G2 Install Manual preview
Nord Modular G2
Brand: Clavia Pages: 2
Natec Genesis RX33 User Manual preview
Genesis RX33
Brand: Natec Pages: 4
Zagg Keys Universal Quick Manual preview
Keys Universal
Brand: Zagg Pages: 4
Casio WK-1600 User Manual preview
WK-1600
Brand: Casio Pages: 46
CH Products Multi Function Panel USB Quick Start Manual preview
Multi Function Panel USB
Brand: CH Products Pages: 2
Kawai FS650 Owner'S Manual preview
FS650
Brand: Kawai Pages: 46
CCTV Discover JK900 User Instruction preview
JK900
Brand: CCTV Discover Pages: 10
alatech Runaid 10 Quick Start Manual preview
Runaid 10
Brand: alatech Pages: 2
Zoom BLUETOOTH WIRELESS KEYBOARD Quick Start preview
BLUETOOTH WIRELESS KEYBOARD
Brand: Zoom Pages: 5
VooPoo Rimfire RTA Manual Instruction preview
Rimfire RTA
Brand: VooPoo Pages: 6
VooPoo DRAG 2 User Manual preview
DRAG 2
Brand: VooPoo Pages: 12
Datalogic Universal Keyboard Wedge Connectivity Manual preview
Universal Keyboard Wedge
Brand: Datalogic Pages: 11
Trust 19404 Quick Installation Manual preview
19404
Brand: Trust Pages: 75
Tecknet X373 Instructions Manual preview
X373
Brand: Tecknet Pages: 6
Tecknet X331 User Manual preview
X331
Brand: Tecknet Pages: 8

Brands by name

Popular brands

Load more brands