62
ELB-02 Owner’s Manual
V
o
ice Controls and Effects
3
1
Depth
Determines the depth of reverberation or the level of the reflected sounds. Coarse
reverb depth settings are made with the panel REVERB buttons. The REVERB buttons
let you make coarse adjustment over a five-step range to the reverb depth, while this
parameter gives you fine control. When this parameter is set to the minimum, the
settings in Voice Condition display, Page 1 (page 54) have no effect.
Range:
0 – 24
2
Type
Selects the Reverb Type for the Voice sections. Several types can be selected: Room,
Hall, Stage, and so on. After changing the reverb type, the Time parameter below is
automatically changed corresponding to the selected reverb type.
3
Time
Determines the reverb length for the Voice sections.
Higher settings result in a longer reverb sound.
Range:
0.3s – 30.0s
1
Type
Determines the reverb type for rhythm, accompaniment and keyboard percussion.
2
Time
Determines the length of reverb applied to the rhythm, accompaniment and keyboard
percussion.
Range:
0.3s – 30.0s
NOTE
Depending on the reverb
depth value (set in the
Reverb display), two
adjacent REVERB button
lamps may be lit at the same
time, indicating an
intermediate position.
Reference Page
The amount of reverb
applied to each Voice
section (page 54)
Reference Page
Changing the rhythm
volume/reverb (page 74)
Reference Page
[Page 2] Reverb Display
1
2
Reference Page
Summary of Contents for Electone STAGEA ELB-02
Page 2: ...2 ELB 02 Owner s Manual ...
Page 3: ...3 ELB 02 Owner s Manual ...
