191
10
ELB-02 Owner’s Manual
C
onnections
3
Expression
Determines the control of the expression pedal functions. Ordinarily, this control
is set to Auto.
Successive presses of the [C] button alternate among Auto, Internal and External.
Auto:
Internal and External is automatically switched.
Internal:
You can manually control the expression pedal even during MDR.
playback.
External:
While playing the MDR or receiving MIDI messages, the expression
pedal has no effect. (The volume is controlled by the recorded data in a
USB flash drive or received MIDI data.)
For setting the channels over which MIDI information will be transmitted.
Any channel from 1 through 16 can be assigned to each keyboard, the Upper
Keyboard, the Lower Keyboard and the Pedalboard. The MIDI messages on
each keyboard will be sent over the channels set here. You must set the
transmit channel here to match the receive channel of the connected device.
1
Upper Keyboard
You can select the channel for the Upper Keyboard.
Press the [A] button to select the item, then use the DATA CONTROL dial to select the
setting.
2
Lower Keyboard
You can select the channel for the Lower Keyboard.
Press the [B] button to select the item, then use the DATA CONTROL dial to select the
setting.
3
Pedalboard
You can select the channel for the Pedalboard.
Press the [C] button to select the item, then use the DATA CONTROL dial to select the
setting.
4
Rhythm
Deletes unnecessary MIDI data and keeps it from being transmitted from the Electone.
Rhythm start/stop messages can be filtered on the Electone.
Successive presses of the [D] button alternate between being transmitted (FILTER
OFF) and not transmitted (FILTER ON).
MIDI Out Channel Display
1
2
3
4
Summary of Contents for Electone STAGEA ELB-02
Page 2: ...2 ELB 02 Owner s Manual ...
Page 3: ...3 ELB 02 Owner s Manual ...
