manualshive.com logo in svg

Yamaha Electone STAGEA ELB-02, Owner'S Manual

The Yamaha Electone STAGEA ELB-02 is an advanced musical instrument offering a wide range of features. To make the most of this product, it's essential to have the Owner's Manual. You can easily download the manual for free from manualshive.com, providing detailed instructions to enhance your musical journey.

Share
Download
background image

169

ELB-02 Owner’s Manual

Audio

The convenient [AUDIO] button allows you to play back audio files (.WAV) saved to a USB flash 
drive. Moreover, since you can record your performances and recordings as audio data (.WAV) to 
a USB flash drive, it is possible to play back the files on computer, share them with your friends, 

and record your own CDs to enjoy as well.

Compatible USB flash drives 

Please make sure to use the compatible USB flash drives listed in the Compatible USB Device List downloadable 
from the Yamaha website:
http://download.yamaha.com/
Use of unsupported devices may result in data saving/recalling operations to abort, etc. Before using a USB flash 
drive, be sure to read “Connecting a USB Device” on page 132.

NOTICE

To avoid the possibility of malfunction/ damage to data, follow the notices below.

• Yamaha recommends that you format a USB flash drive (page 133), after checking if the USB flash drive does not contain any 

important data, and to use it only for audio recording/playback. Using MDR Songs and audio data together in the same drive 
may cause severe fragmentation of the USB flash drive, and may stop audio recording/playback altogether.

• Insert the USB flash drive firmly and take care that the USB flash drive does not loosen from the connection from sudden 

shaking while performing, etc. during audio recording/playback. If the USB flash drive is disconnected while recording, it may 
result in data corruption in the USB flash drive.

USB flash drive

External 

audio device

Audio file

Audio file

Audio file

Computer

1

Recording Your Performance as Audio

NOTE

When recording audio that is 
input from the [AUX IN] jack 
to the USB flash drive, the 
output volume of the external 
audio device connected to 
this instrument cannot be 
controlled by the Electone. 
Adjust the volume level from 
the control on the external 
audio device.

Audio Recording

With this method, recorded performances are saved to a USB flash drive as an audio file. 
An Audio file is a recording of the performed sound itself. Since it is saved in stereo WAV 
format of normal CD quality resolution (44.1kHz/16bit), it can be transmitted to and 
played on portable music players by using a computer. You can also record the sound of 
an external device since all the sounds produced via your keyboard performance and the 
sound input from the [AUX IN] jack will be recorded. 
Keep in mind, however, that Audio recording cannot be used to save Registrations. If you 
want to save Registrations, perform the “Recording” operation described on page 138 in 
chapter 6.

7

Summary of Contents for Electone STAGEA ELB-02
























































































































































































































Reviews:

No comments

Related manuals for Electone STAGEA ELB-02

UEi MM100 Instruction Manual preview
MM100
Brand: UEi Pages: 4
Tascam SX-1 Application Manual preview
SX-1
Brand: Tascam Pages: 4
Harpers NL-404 Service Manual preview
NL-404
Brand: Harpers Pages: 8
jenway PFP7 Operating Manual preview
PFP7
Brand: jenway Pages: 50
jenway 7300 Operating Manual preview
7300
Brand: jenway Pages: 62
Olympus EPOCH 650 User Manual preview
EPOCH 650
Brand: Olympus Pages: 362
Olympus 27MG Getting Started Manual preview
27MG
Brand: Olympus Pages: 8
Omano CX-3 User Manual preview
CX-3
Brand: Omano Pages: 14
Harken RigTune Pro Manual preview
RigTune Pro
Brand: Harken Pages: 2
Huvitz CRK-8800 Service Manual preview
CRK-8800
Brand: Huvitz Pages: 58
Ratek SVR7100 User Manual preview
SVR7100
Brand: Ratek Pages: 24
Amptec Research 620LK Installation, Operation And Maintenance Manual preview
620LK
Brand: Amptec Research Pages: 19
Kane KANE451 Manual preview
KANE451
Brand: Kane Pages: 52
Saturn South SS9007.3 Mini CT Meter User Manual preview
SS9007.3 Mini CT Meter
Brand: Saturn South Pages: 18
J-TECH VF563 Series Operator'S Manual preview
VF563 Series
Brand: J-TECH Pages: 3
SV SLA-PA201 Manual preview
SLA-PA201
Brand: SV Pages: 88
Labgear SQ-701 Instruction Sheet preview
SQ-701
Brand: Labgear Pages: 2
Draminski 29356 Manual preview
29356
Brand: Draminski Pages: 22

Brands by name

Popular brands

Load more brands