manualshive.com logo in svg

Yamaha Electone Stagea 01C, Owner'S Manual

Share
Download
Yamaha Electone Stagea 01C Owner'S Manual Download Page 121

ELS-01/01C/01X Owner’s Manual

121

Music Data Recorder (MDR)

7

Confirm that the desired song to be deleted is displayed in upper half of the 
display. If you want to change the song, press the [CHANGE] button to call up 
the song select display and select the desired song.

Select the desired data you want to delete, “REGIST” and/or 
“SONG.”

When you want to delete the entire song, select both REGIST and SONG. 
If only “REGIST” is selected, the Registration data in the song will be deleted. 
If only “SONG” is selected, the performance data in the song will be deleted. 
If the song does not contain Registration (or performance) data, you cannot 
select “REGIST” (or “SONG”) in the display.

Press the [EXECUTE] button.

A message will appear prompting confirmation of the operation. Select 
[DELETE] to delete the song, or [CANCEL] to abort the operation.

About Protected Songs

If you buy or download the song data, it may be protected so that you cannot delete 
or copy, in order to prevent accidental erasure or protect copyright. This is 
“Protected Song.” Protected songs can be saved to a SmartMedia card with ID or 
USB flash memory.

The protected song can be played back as same as the song you created, but it 
cannot be converted to XG format, or EL format. It is not possible to edit the 
Registration data in the protected song, nor to overwrite the performance data.

If you want to edit the protected song, first copy it within one media/folder, then 
edit the copy. (You cannot copy to another media/folder.) The copy song (called 
“protected edit song”) is available only when the original song (called “protected 
original song”) exists in the same folder. Be careful not to delete the protected 
original song.

To move the protected song in a SmartMedia card with a computer, 
you’ll need to use the Musicsoft Downloader application.  If you 
move the song without Musicsoft Downloader, the song cannot be 
played back.
Musicsoft Downloader can be obtained at the following Internet 
address: 
http://music.yamaha.com/download/ 

4

5

Folder

Protected 

Original 

Song

Protected 
Edit Song

Copy

You cannot edit this song

You can edit this song, only when this is in the folder 
that contains protected original song.

Summary of Contents for Electone Stagea 01C

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands