Vo
ice Controls and Ef
fects
3
17
3
Voice Controls and Effects
You can add Reverb and Sustain effects to your selected voices.
1
Reverb
Reverb adds an echo-like effect to the sound, giving the impression of a
performance in a large room or concert hall. Reverb effect affects the entire
system at one time.
You can control the amount of Reverb applied to the Electone by pressing one
of the Reverb buttons.
The controls have seven volume settings, from a minimum of 0, or no effect, to
a maximum of full Reverb.
REVERB
MAX
MIN
2
Sustain
The Sustain effect, selectable for the Upper, Lower and Pedal voices, causes
voices to gradually fade out when the keys are released. Each keyboard can
be turned on/off independently.
Pressing the Sustain buttons at the far left side of the panel lights up the lamps
of the buttons, which indicate that sustain is on. Press the buttons again to turn
sustain off.
SUSTAIN
UPPER
(KNEE)
LOWER
(KNEE)
PEDAL
NOTE:
Sustain cannot be applied to the Lead
voices.
NOTE:
If Knee Lever control of the Upper or
Lower sustain has been turned on (folded
down), pressing the Upper or Lower
buttons here will not add sustain unless the
Knee Lever is pushed. (See page 49 for
more information.)
NOTE:
Remember that the SUSTAIN buttons are
on/off switches. Remember to check
whether the sustain button lamps are on or
off before you start to play.
Summary of Contents for Electone EL-200
Page 1: ......