10
1
Quick Introductory Guide
1
Getting Started
1
Plug the power cord in to an appropriate electrical outlet.
Only use the voltage specified as correct
for the Electone. The required voltage is
printed on the name plate of the Electone.
Yamaha products are manufactured
specifically for the supply voltage in the
area where they are to be sold. If you
should move, or if any doubt exists about
the supply voltage, please consult with a
qualified technician.
2
Turn on the Electone by pressing the POWER switch.
POWER
When the Electone is turned on, Basic Registration 1 is automatically
selected.
3
Set the MASTER VOLUME control.
The MASTER VOLUME control is an overall control that affects the
volume of the entire instrument.
MASTER VOLUME
4
Press the Expression pedal down with your foot.
Once you have set the MASTER VOLUME control to a suitable level,
you can use the Expression pedal to change the volume with your foot
as you play.
Louder
Softer
Summary of Contents for Electone EL-200
Page 1: ......