Yamaha EK40G, Service Manual, Page: 91 / 200

6H95G11 5-34
9
8
7
6
5
4
3
2
1
Crankcase
8. Install the bushing
7
on the pressure
plate
8
.
NOTE:
When installing crank 3 to the pressure plate,
do not use the bushing
7
.
9. Install crank 1 (or crank 3) to the pres-
sure plate.
10. Align the crankpin hole in crank 1 (or
crank 3) with the crankpin fitted to crank
2 (or crank 4) and place the pressure
plate in the body.
NOTE:
Apply engine oil to the crankpin.
11. Insert the press body
9
, and install crank
1 (or crank 3) onto the crankpin using a
press.
c C
Do not apply force in excess of 5 tons.
12. Measure the width
b
of the assembled
crankshaft using calipers. Measurements
should be made at positions
c
to
g
.
6B450710
9
6B450720
b
c
d
e
g
f
6B450700
Bushing-12 (D35)
7
: 90890-02366
Pressure plate
8
: 90890-02384
Press body
9
: 90890-02385
6B450690
E
6H95G11_05 04.8.20 11:05 Page 35