Yamaha DXS Series, Service Manual

Page: 3 / 88

3
DXS12/DXS15
SPECIFICATIONS
（総合仕様）
General DXS12 DXS15
System Type Powered Subwoofer, Band-pass Type
Frequency Range (-10dB) 47Hz – 160Hz 45Hz – 160Hz
Coverage Angle –
Crossover Type –
Crossover Frequency –
Measured Maximum SPL (peak)
IEC noise@1m 131dB SPL 132dB SPL
Transducer DXS12 DXS15
LF Diameter 12" Cone 15" Cone
Voice coil 2.5" 2.5"
Magnet Ferrite
HF Diaphragm –
Type –
Magnet –
Enclosure DXS12 DXS15
Material, Finish, Color Wood, Paint, Black
Floor Monitor Angle –
Dimensions
(WxHxD, with rubber feet) 397×563×594 mm
(15-5/8" x 22-1/8" x 23-3/8") 478×618×624 mm
(18-7/8" x 24-3/8" x 24-1/2")
Net Weight 33.0kg (72.8lbs) 38.0kg (83.8lbs)
Handles Metal (Side x 2)
Pole Socket 35mm (Top)
Rigging points –
Optional Accessory (U-bracket) –
Amplifi er DXS12 DXS15
Ampli fi er Type Class-D
Power Rating *1 Dynamic 950W
Continuous 600W
Cooling Fan cooling, 4 speeds
AD/DA 24bit 48kHz sampling
Signal Processing 48bit (Accumulator: 76bit)
HPF/LPF 80, 100, 120Hz 24dB/oct LPF
DSP preset D-XSUB: BOOST, XTENDED-LF, OFF
Protection Speaker Clip limiting, Integral Power Protection, DC-fault
Ampli fi er Thermal, Output over current
Power supply Thermal, Output over voltage, Output over current
Connectors Input INPUT: XLR3-31 x 2
Output THRU: XLR3-32 x 2 (Parallel with INPUT)
Input Impedance INPUT1 10k Ω
INPUT2, 3 –
Input Sensitivity
(LEVEL: Maximum) INPUT1 +1dBu
INPUT2, 3 –
Input Sensitivity
(LEVEL: Center) INPUT1 +11dBu
INPUT2, 3 –
Maximum Input Level INPUT1 +24dBu
INPUT2, 3 –
Controls LEVEL, POLARITY, LPF, D-XSUB, FRONT LED DISABLE, POWER
Idle Power Consumption 35W
1/8 Power Consumption 120W
Power Requirements 100V – 240V, 50Hz/60Hz
0dBu is referenced to 0.775Vrms.
*1 Power rating (120V, 25°C). This is total value of individual output power.
• Included Accessories
· AC power cord
· Owner's manual
• 付属品
· 電源コード
· 取扱説明書