Getting started
21
En
B
A
SIC OPERA
T
ION
3
Engl
ish
■
Setting a TV
– Make sure you have completed all the necessary
connections (see “Connecting a TV” on page 14).
– To return to the previous menu, press .
– To exit from the menu, press
SET UP
.
– If the settings you have selected are not
appropriate, you can reset all settings to the initial
factory settings (see “Restoring to the factory
defaults” on page 43).
1
Press
DVD/CD
.
→
“
DVD/CD
” appears in the display panel.
2
Turn on the TV and set to the correct video-in
channel.
→
You should see the background screen on the TV.
–
Usually this channel is between the lowest and
highest channels and may be called FRONT, A/V IN
or VIDEO. See your TV manual for more details.
–
Or, you may go to channel 1 on your TV, then press
the Channel down button repeatedly until you see the
Video In channel.
–
Or, the TV remote control may have a button or
switch that chooses different video modes.
Selecting the TV type
In order for a DVD to play on this DVD receiver, the color
system of the DVD, the TV and the DVD receiver should
match. Before changing the TV system, determine the
color system of your TV.
1
In DVD/CD mode, press
SET UP
.
2
Press
/
repeatedly to select [VIDEO SETUP
PAGE].
3
Press
/
to highlight [TV TYPE], then press
.
4
Press
/
to highlight one of the options below:
PAL
– Select this if the connected TV has the PAL
color system. It will change the video signal of an
NTSC disc and output it to PAL format.
NTSC
– Select this if the connected TV has the NTSC
color system. It will change the video signal of a PAL
disc and output it to NTSC format.
MULTI
– Select this if the connected TV is compatible
with both NTSC and PAL (multisystem). The output
format will be in accordance with the video signal of
the disc.
5
Select a setting and press
ENTER
.
–
Follow the instructions shown on the TV to confirm
the selection (if any).
–
If a blank/distorted TV screen appears, wait for 15
seconds for auto recovery to activate.
Selecting color system by using the
remote control
1
If a disc is inserted, press
to eject the disc.
2
Press
, then press
AUDIO
.
→
If the default setting of the color system is
NTSC
,
it will be changed to
PAL
.
→
If the default setting of the color system is
PAL
, it
will be changed to
NTSC
.
Notes
VIDEO SETUP PAGE
TV TYPE
PAL
TV DISPLAY
NTSC
PICTURE SETTING
MULTI
ADV PICTURE
PROGRESSIVE
COMPONENT
STANDBY/ON
EJECT
DIMMER
BASS
TREBLE
ENTER
DIRECT
DVD/CD
TUNER
SURROUND
AUX
SUBTITLE
ANGLE
ZOOM
AUDIO
MUTE
AREA
MODE
USB
ENHANCER
NIGHT
REPEAT
ON SCREEN
MENU
SET UP
TOP MENU
/RETURN
FREQ/TEXT
MODE
START
PRESET
PRESET
PROG
A-B
SHUFFLE
SLEEP
PTY SEEK
AUDIO
