Yamaha DTXTREME Reference Manual Download | Manualshive

Page: 78 / 136

background image

REFERENCE SECTION

Utility Mode

78

2

Output

Select the output for the click sound. You can
choose from stereo (the main OUTPUT L/R
jacks), phones (headphone jack), st+ph
(OUTPUT L/R and headphone jacks) and indiv1
to indiv6 (one of the individual output jacks).

❏

Settings:

stereo, phones, st+ph, indiv1 - indiv6

3

Mode

Select the click mode.

manual:

The click can only be enabled or

disabled by the CLICK button.

play:

The click can be enabled or disabled by

the CLICK button. It is also enabled when the
sequencer starts playing and disabled when it is
stopped.

rec:

The click is enabled or disabled by the

CLICK button. It is also enabled when the
sequencer starts recording and disabled when it
is stopped.

play&rec:

The click is enabled or disabled by

the CLICK button. It is also enabled when the
sequencer is playing or recording and disabled
when it is stopped.

❏

Settings:

manual, play, rec, play&rec

4

MIDIOut

Enable or disable the transmission of the click as
MIDI events.

❏

Settings:

off, on

[UT 14] Click 2

In this page, you can select the accented click
sound (played on the first beat of the measure).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.

1

Type

Select the category of the voice to be used for the
accented click.

2

Voice[High]

Select the number and name of the voice to be
used as the accented click. You can select from
the voices in the category selected in “Type”.

❏

Settings:

Drum voice number and name

n

Any voice that is used in a drum kit can be selected.

3

Vol

Set the volume of the accented click.

❏

Settings:

0 - 127

4

Tuning

Set the pitch of the accented click.

❏

Settings:

-24.00 - +24.00

[UT 15] Click 3

In this page, you can select the on-beat click
sound (played on every beat of the measure
other than the first).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.

1

Type

Select the category of the voice to be used for the
on-beat click.

2

Voice[Mid]

Select the number and name of the voice to be
used as the on-beat click. You can select from the
voices in the category selected in “Type”.

❏

Settings:

Drum voice number and name

[UT 14] Type Voice[High] Vol Tuning
CLICK Percus 11 RollRiml 127 +10.25

1

2

3

4

[UT 15] Type Voice[Mid] Vol Tuning
CLICK Percus 11 RollRiml 127 +10.25

1

2

3

4

«
...
76
77
78
79
80
...
»

Summary of Contents for DTXTREME









































































































































Reviews:

No comments

Related manuals for DTXTREME

ELECTRO ACOUSTIC

Brand: SONICCOUTURE Pages: 24

Brand: Yamaha Pages: 34

MILLENIUM MPS-425

Brand: thomann Pages: 12

Millenium Focus Junior

Brand: thomann Pages: 28

Brand: SYNCUSSION Pages: 2

Brand: Delptronics Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands