REFERENCE SECTION
Drum Kit T
rigger Edit Mode
39
[FootCtrl2] Foot Controller 2
Specify the MIDI message type and channel
transmitted by the foot controller connected to
the HI-HAT CONTROL jack on the rear panel. If
the “Func” parameter in the [FootCtl1] page has
been set to “MIDI,” the MIDI control message
specified here is transmitted.
1
HHInput (Hi-hat Input)
Select the input to be used for a hi-hat. If the
“Func” parameters in the [Foot Ctl1] and
[FootSw1] pages have been set to “HiHat,” the
trigger input for the hi-hat is set here.
❏
Settings:
none, IN1 - IN16
2
MIDI (Transmit Channel)
Set the MIDI channel used to transmit data
generated by the foot controller.
❏
Settings:
MIDI channel: 1 - 16
3
Type
Set the type of MIDI control message that the
foot controller will transmit.
❏
Settings:
Ctl0 - Ctl119 (Controller number), A/T
(Aftertouch), P/B up (Pitch Bend Up), P/Bdwn
(Pitch Bend Down)
[FootSw1] Foot Switch 1
Set up the footswitch connected to the FOOT SW
jack on the rear panel. Also set the MIDI channel
and controller number if it is as a MIDI controller.
1
Func (Function)
Set the foot controller function. The following
functions are available.
HiHat:
Acts as a hi-hat controller (switching
between open and closed positions). With this
setting selected, you can also set the Velocity
parameter in this screen.
click:
Enables or disabled the click.
inc:
Increments the Drum Kit number in Drum
Kit mode, and the step number in Chain mode.
dec:
Decrements the Drum Kit number in Drum
Kit mode, and the step number in Chain mode.
bypas:
Enables or disables all trigger inputs.
SStop:
Starts or stops the main song.
MIDI:
Outputs MIDI channel messages (control
change). With this setting selected, you can also
set the MIDI and Type parameters in this screen.
HH
➝
BD (Hi-hat
➝
bass drum):
Generates a
trigger signal for the trigger input 9 (KICK) when
the footswitch is pressed. With this setting
selected, you can also set the Velocity parameter
in this screen.
❏
Settings:
HiHat, click, inc, dec, bypas, SStop, MIDI,
HH
➝
BD
2
Velocity
Set the velocity value output for a trigger signal
when the “Func,” “HiHat” and “HH
➝
BD”
settings have been selected.
❏
Settings:
1 - 127
[FootCtl2] HHInput MIDI Type
IN8 10ch Ctl 7
1
3
2
[FootSw1] Func Velocity MIDI Type
HiHat 111 ---- ------
1
4
3
2
Summary of Contents for DTXTREME
Page 1: ......
