Edit Section
53
[Voice6] Output Routing
This page lets you set an output routing for the voice assigned
to the note number. Though your basic options are one of
the INDIVIDUAL OUTPUT (1 to 6) jacks for parallel
output or a pair of OUTPUT jacks for stereo output, you can
use them for more variations in conjunction with effect
settings (page 55).
1
Note Number & Name
Determines a target note number (13~94: C#-1~A#5). Each
note number is shown with a specific note name.
2
Output
Determines the output for the voice assigned to the note
number
1
. When routed to an Individual Output, the voice
cannot be monitored using headphones.
❏
Settings:
• stereo: Routed to OUTPUT (L/MONO and R).
• InsFx1, InsFx2: Routed to the specified insertion effect (1 or 2).
You cannot select these when the Localizer is enabled.
• thru: Routed to OUTPUT (L/MONO and R) bypassing the
Localizer. You can select this only when the Localizer is enabled.
• IND1&2, 3&4, 5&6: Routed to the specified pair of Individual
Outputs (in stereo).
• IND1, 2, ... 6: Routed to the specified Individual Output (in
mono).
n
If you select either insertion effect (InsFX1 or InsFX2), the final
output is determined by the insertion effect settings.
3
RevSend
Determines the send level to the reverb effect (system effect)
for the voice assigned to the note number
1
.
❏
Settings:
0~127
4
ChoSend
Determines the send level to the chorus effect (system effect)
for the voice assigned to the note number
1
.
❏
Settings:
0~127
n
Actual amounts of the reverb and chorus effects for each drum voice
are determined by the master send levels for the entire drum kit
(page 58).
[VoiceCopy] Voice Copy
You can copy voice settings for a specific note number (MIDI
channel 10) to the drum kit you are editing, letting you set up
an editing template for creating drum kits with similar
settings.
1
(from) Note
Determines the source note name (of the current drum kit).
❏
Settings:
13C#-1~94A#5
2
(to) Kit
Determines the destination drum kit. Select current when
copying to the current drum kit.
❏
Settings:
current, U1~U40
3
(to) Note
Determines the destination note name of the drum kit
2
.
❏
Settings:
13C#-1~94A#5
Copy Operation
After selecting the source and destination, press the ENTER/
YES button. An “Are You Sure?” confirmation message
appears in the display. Press the ENTER/YES button again to
actually execute the copy operation. Press the EXIT/NO
button to cancel. When you return to the copy page,
continue copying if desired, or resume making voice settings.
[Voice6] Output RevSend ChoSend
49C#2 stereo 127 127
1
4
3
2
[VoiceCopy] Note Kit Note
from 49C#2 to current 49C#2
1
3
2
