background image

Setup

14

Pads and Triggers

Compatible Products

You can use the DTXTREME IIs with any currently available 
Yamaha pad products.  Since each pad is designed for a 
specific purpose and has its own specifications, you’ll need to 
check which product is most suitable for connecting to a 
specific DTXTREME IIs trigger input.  When you purchase 
additional pads for your kit, refer to the following table for 
optimum compatibility.

n

For detailed information on Yamaha pad products, refer to the 
DTXTREME IIs product brochure or your local Yamaha website.

Drum Pad (TP100/TP120SD)

A new series of drum pads that adopt a newly developed 
rubber head.  When used for the snare drum and toms, these 
pads can produce real continuous tone change by three-zone 
position sensing. These pads also employ a new pad controller 
for adjusting the snare or tom tone (such as tuning) while 
playing the kit.

Real Head Pad (RHP/KP series)

These pads feature a wooden drum shell made of plied birch 
and mahogany, and a real drum head — just as on acoustic 
drums.  This series include three different pads for bass drum, 
snare drum, and toms and designed especially for use with 
Yamaha System Drums.

Rubber Pad (TP/PCY/KP/BP series)

Standard lineup of drum and trigger pads made of rubber 
material.  In addition to traditional dual and single trigger 
pads (dual pads have a rim switch), several new pads with 
three-zone position sensing feature are also available.  These 
pads are convenient for triggering pad songs or switching a 
drum kit or song in chain play.

Hi-hat Controller (HH/RHH series)

Indispensable for subtle hi-hat work with a DTXTREME IIs 
drum kit. Choose your favorite combination of the hi-hat 
"pedal and cymbals," such as HH-series controller and TP-
series pad. You can even choose a real hi-hat stand (such as 
Yamaha HS series) and an RHH130 pad with two zone 
position sensing.

Drum Trigger (DT series)

These trigger pickups are designed for attaching to acoustic 
drums, making them ideal for expanding the capabilities of 
your acoustic drum kit with the DTXTREME IIs electronic 
sounds.  Each pickup can produce a single trigger.  Keep in 
mind that attaching two drum triggers to a single snare drum 
will not produce the same effect as using a dual trigger pad.

S e t u p

Summary of Contents for DTXTREME IIs






































































































Reviews: