KIT
DTX700 Reference Manual
25
Using the following parameters, you can adjust the
send level to be set for each of the effect units when
the current kit is selected.
q
MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings:
1 to 16
Variation Send Level (VarSend(Dry))
Use this parameter to set the variation-effect send level to be sent
whenever the current kit is selected.
Settings:
0 to 127
NOTE
•
If the above MIDI channel (Ch) is set to 10, this setting will be
displayed as “---” and modification will not be possible.
Chorus Send Level (ChoSend)
Use this parameter to set the chorus send level to be sent when-
ever the current kit is selected.
Settings:
0 to 127
Reverb Send Level (RevSend)
Use this parameter to set the reverb send level to be sent when-
ever the current kit is selected.
Settings:
0 to 127
q
MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings:
1 to 16
Control Change Number (CC No)
Use this parameter to set the type of MIDI Control Change mes-
sage to be sent whenever the current kit is selected. No Control
Change messages are sent when “off” is set.
Settings:
off, 1 to 95
Control Change Valve (CC Val)
Use this parameter to set a value for the MIDI Control Change
message sent whenever the current kit is selected.
Settings:
0 to 127
NOTE
•
If the Transmit parameter (also from the Menu area’s Kit/MIDI/
Other page) has been set to “off” or “PC”, this setting will be
displayed as “---” and modification will not be possible.
•
If the type of MIDI Control Change message set here matches
one of the following Control Change message types (also set
on the Menu area’s Kit/MIDI/Other page), this parameter’s set-
ting will have priority.
Volume, Pan, VarSend(Dry), ChoSend, and RevSend
KIT/MIDI/OTHER 3/4
q
KIT/MIDI/OTHER 4/4
q
