background image

Basic Techniques

DTX400K/DTX430K/DTX450K     Owner’s Manual

27

Using the Metronome

Playing your electronic drum kit along with the built-in metronome is a great way to perfect your 
rhythm.

Press the 

[

]

 button to turn on the metronome.

Press the 

[

]

 button once again to turn it off.

To adjust the volume of the metronome, press and hold the 

[

]

 button, and then press either the 

[]

 or 

[VOLUME–]

 button.

Each time you press the 

[]

 button, you 

increase the metronome volume by one.

Each time you press the 

[VOLUME–]

 button, you 

decrease the metronome volume by one.

Whenever necessary, you can confirm the drum module’s 
current tempo from the flashing pattern of the number but-
ton lights.

Press either the 

[TEMPO+]

 or 

[TEMPO–]

 button once.

Each digit of the tempo will be flashed in sequence.

Example:

When the tempo is 108 BPM, the number button lights will 
flash [1]

[0]

[8].

Whenever necessary, you can have the drum module speak 
the current tempo to you as a BPM value.

Press and hold the 

[

]

 button. You will hear the current 

tempo spoken (in English), and the number button lights 
will flash as described above.

Starting and Stopping the Metronome

Adjusting the Metronome Volume

Hold

Higher metronome volume

Lower metronome volume

Confirming Tempo via Number Buttons

Confirming Tempo via Voice Guidance

Summary of Contents for DTX400K





































































Reviews: