121
Feature Reference — Utility Mode
25 Lo Mi Hi (gain)
Set the gain to 3 frequency ranges: low, middle,
and high. It is possible to boost or decrease the
selected range using this function.
Move the cursor to the Lo, Mi, or Hi focus area
using the
Q
cursor buttons and set the
gain by rotating the Data Scroll Wheel or using
the +1/YES and -1/NO buttons. The positive
(plus “+”) values boost the range and the
negative (minus “-”) values decrease the range.
MISC.
SNARE
KICK
CYMBAL
Lo Mi Hi
+0 +0 +0
High
Middle
Low
Settings:
The following values can be set to each Lo, Mi, or Hi focus
area.
-6 to 0 to +6
26 Lo Freq (low frequency)
This function sets the center frequency of the
low frequency range of gain control.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the center frequency.
MISC.
SNARE
KICK
CYMBAL
Lo Freq
F= 100Hz
Settings:
32Hz to 2.0 kHz
27 Mid Freq (mid frequency)
This function sets the center frequency of the
middle frequency range of gain control.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the center frequency.
MISC.
SNARE
KICK
CYMBAL
Mid Freq
F= 800Hz
Settings:
100Hz to 10 kHz
28 Hi Freq (high frequency)
This function sets the center frequency of the
high frequency range of gain control.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the center frequency.
MISC.
SNARE
KICK
CYMBAL
Hi Freq
F=2.0kHz
Settings:
500 to 16 kHz
Summary of Contents for DTX
Page 4: ......
Page 32: ...28 Getting Started...
Page 174: ...D T M T YAMAHA DRUM TRIGGER MODULE DTX VERSION2 0 OWNER S MANUAL...