Yamaha DTX-PRO Reference Manual Download Page 136

Page: 136 / 145

Connecting a Computer

136

DTX-PRO DTX-PROX Reference Manual

To use audio data with a Windows computer, you need to install the

Yamaha Steinberg USB Driver

Download the latest Yamaha Steinberg USB Driver from the following URL.

https://download.yamaha.com/
Press the [(driver name)

] button, download and open the file.

Install the

Yamaha Steinberg USB Driver

on your computer.

For more information, please refer to the

Yamaha Steinberg USB Driver

Installation Guide.

For more information on recording or audio playback, please refer to the Owner’s Manual for your DAW software.

When you use a macOS computer or when you use a Windows computer only to handle MIDI data, installation of the

Yamaha Steinberg USB

Driver

is not required.

• Information on system requirements is provided on the above web page.

• For improvement, the

Yamaha Steinberg USB Driver

may be upgraded without notice. For details and the most up-to-date information,

please visit the above website.

MIDI-related Reference

Information related to MIDI and creating music with a computer, is provided in the Data List (PDF).
The Data List (PDF) is available for download at the following web page.

https://download.yamaha.com/

* Yamaha Corporation reserves the right to modify this URL at any time without prior notice.

Installing the

Yamaha Steinberg USB Driver

NOTE

Using DAW Software

Summary of Contents for DTX-PRO


















































































































































Search results

Summary of Contents for DTX-PRO

Reviews:

Related manuals for DTX-PRO

Brands by name

Popular brands

Yamaha DTX-PRO, Reference Manual

Search results

Summary of Contents for DTX-PRO

Reviews:

Related manuals for DTX-PRO

Brands by name

Popular brands