Yamaha DSP-Z11 Page 110 Owner'S Manual Download

Page: 110 / 150

Remote control features

110

Use the supplied simplified remote control to make basic controls of this unit.

When you select “NET/USB” as the input source, this unit activates the last selected sub input source (see page 67).

■

Setting the controlling zone of the simplified
remote control

Use this feature to set the controlling zone (see page 116) and
remote control ID (see page 119) of the simplified remote control.

Setting the remote control ID

Press and hold

on the simplified remote control and then 1 or

2 for 3 seconds to select the desired remote control ID.
• ID1: Press and hold

and 1.

• ID2: Press and hold

and 2.

Setting the controlling zone

Press and hold

on the simplified remote control and then 1, 2,

3, or 4 to select the desired zone.
• Main zone: Press and hold

and then press 1.

• Zone 2: Press and hold

and 2.

• Zone 3: Press and hold

and 3.

• Zone 4: Press and hold

and 4.

■

Replacing the battery in the simplified remote
control

Change the battery when the operation range of the simplified
remote control decreases.

• Insert the battery according to the polarity markings (+ and –).
• If the batteries run out, immediately remove them from the simplified

remote control to prevent an explosion or acid leak.

• If a battery starts leaking, dispose of it immediately. Be careful not to let

the leaking battery acid touch your skin or clothing.

• Before inserting new batteries, wipe the compartment clean.
• Dispose of batteries according to your regional regulations.

Simplified remote control

Note

POWER

STANDBY

INPUT

SYSTEM MEMORY

INT SOURCE

VOLUME

MUTE

PRESET

STANDBY

Sets the selected zone to the
standby mode.

☞

P. 39

SYSTEM MEMORY

Save or recall the system settings.

☞

P. 96

INPUT

Select the input source.

☞

P. 50

/–

Recall the preset network/USB
contents.

☞

P. 70

(stop) /

(play) /

(skip backward) /

(skip forward)

Control playback of the iPod or
Network/USB contents.

☞

P. 64, 67

POWER

Turn on the power.

☞

P. 39

/–

Adjust the volume level.

☞

P. 50

MUTE

Mutes the audio output.

☞

P. 52

Remove the insulation sheet before using the remote
control.

Notes

Use a straight

pin to remove

the cover.

Replace the battery

with a new CR2025

battery.

Close the cover.

Summary of Contents for DSP-Z11























































































































































Search results

Summary of Contents for DSP-Z11

Reviews:

Related manuals for DSP-Z11

Brands by name

Popular brands

Yamaha DSP-Z11, Owner'S Manual

Search results

Summary of Contents for DSP-Z11

Reviews:

Related manuals for DSP-Z11

Brands by name

Popular brands