Saving MIDI Settings
249
DME32—Owner’s Manual
The format for Parameter Change messages is as follows:
STATUS
11110000 F0
System Exclusive Message
ID No.
01000011 43
Manufacturer's ID No.(YAMAHA)
SUB STATUS
0001nnnn 1n
parameter change or response for request
n=0-15 (Device Channel No.1-16)
GROUP ID
00111110 3E
group ID (digital mixer)
MODEL ID
00000101 05
Device code (DME32)
PARAM TYPE
00000000 00
byte operation for edit buffer
DATA
0000aaaa dd1
Parameter No. (H high order bit)
0000bbbb dd2
Parameter No. (H low order bit)
0000cccc dd3
Parameter No. (L high order bit)
0000dddd dd4
Parameter No. (L low order bit)
0000eeee dd5
Parameter value (H high order bit)
0000ffff dd6
Parameter value (H low order bit)
0000gggg dd7
Parameter value (L high order bit)
0000hhhh dd8
Parameter value (L low order bit)
EOX
11110111 F7
End Of Exclusive
For reference, Parameter No. values can be printed from DME Manager.
Saving MIDI Settings
1
Choose MIDI from the Tool menu—the main MIDI window appears.
2
Click File—the MIDI window appears, as shown below.
3
In the Mode section, select Save.
4
In the Save File Name field, enter a title for the MIDI settings.
Titles can be up to 24 characters long. Click the Clear button to clear the title if you want to
start again.
5
Click Save.
The MIDI settings are saved and the MIDI window closes. If a file with the same title already
exists, an overwrite confirmation message appears. Click OK to overwrite and continue, or
click Cancel to cancel the operation.
MIDI settings are saved in the “Midi” folder, which is located inside the DME Manager pro-
gram folder. MIDI settings files can be managed (e.g., copied, deleted, backed up, etc.) just
like any other Windows file.
