244
Chapter 15—MIDI
DME32—Owner’s Manual
3
Make the required settings and then click OK to save your settings, or click Cancel
to leave them unchanged.
The MIDI window closes.
MIDI settings are stored by the DME32 system, not scenes or configurations.
Assigning Scenes & Configurations to Program
Changes
Scenes 1 through 99 and configurations A and B can be assigned to MIDI Program Changes
1 through 128. A table for you to note assignments is provided on page 279.
1
Choose MIDI from the Tool menu.
The MIDI window appears.
2
Click the Program Change tab.
The Program Change page appears, as shown below.
3
Select the Program Change that you want to assign and then click Assign, or sim-
ply double-click the Program Change number.
The Program Change window appears, as shown below.
4
Select a scene from 01 though 99 or configuration A or B.
5
Click OK to save your selection, or click Cancel to leave the setting unchanged.
The Program Change window closes.
If a scene or configuration has already been assigned to the selected Program Change, an
overwrite confirmation message appears. Click OK to overwrite the previous assignment,
or click Cancel to keep it.
