236
Chapter 14—Multiple DME32s
DME32—Owner’s Manual
About Multiple DME32s
DME32s can be cascaded to expand the number of available input and output channels.
Up to four DME32s can be cascaded, offering a maximum of 128 inputs and 128 out-
puts. DME32s can also be cascaded to provide additional DSP processing power, and
signals can easily be distributed among cascaded DME32s by using the Cascade com-
ponents. See “Cascade” on page 92 for more information.
The following table shows how the number of inputs and outputs can be expanded by
using multiple DME32s.
Multiple-Unit System Notes
•
All DME32s must be turned on within 10 seconds.
•
When a scene is stored or recalled using the Run Mode Controller, the corresponding
scene is stored or recalled on all cascaded DME32s.
•
When a configuration is recalled using the Run Mode Controller, the corresponding
configuration is recalled on all cascaded DME32s.
•
For front panel operation, scenes should be stored or recalled, and configurations
recalled on DME32 #1.
•
The password protection functions only need to be set on DME32 #1.
•
Only the MIDI ports on DME32 #1 can be used.
•
Only the PC Card slot on DME32 #1 can be used.
•
The GPI interfaces on all cascaded DME32s can be used, providing a maximum of 64
GPI inputs and 64 GPI outputs with four DME32s.
•
Wordclock settings only need to be made on DME32 #1. The other DME32s automat-
ically receive their wordclocks via the cascade connections.
Number of Units
(DME32)
I/O
Input
Output
1
32
32
2
64
64
3
96
96
4
128
128