Loading Configurations from PC Cards
225
DME32—Owner’s Manual
Loading Configurations from PC Cards
Configurations stored on PC Cards can be loaded as either configuration A or B.
1
Insert the PC Card into the DME32 CARD slot.
2
Use the [UTILITY] button to select the “Load from card” function.
3
With the cursor in the COMPONENT section of the display, use the DATA
wheel or [INC] and [DEC] buttons to select the configuration to load.
4
Use the [PARAMETER] button or cursor buttons to select the PARAMETER sec-
tion of the display, and then use the DATA wheel or [INC] and [DEC] buttons
to select the DME32 configuration into which you want to load the configu-
ration, as shown in the following example.
5
Press the [VALUE] button and the following display appears.
6
Press the [VALUE] button to load the selected configuration, or the [PARAM-
ETER] button to return to the previous display.
The following display appears while the configuration is being loaded.
When loading is complete, the following display appears.
The selected configuration has been loaded to the DME32.
7
Press the [UTILITY] button repeatedly until the UTILITY indicator goes out.
SCENE NO.
CONFIGURATION
SCENE
CNF1
XXXX
ConfigA
XXX
YES
Load
X
from
X
card
X
to
X
me.
_
0 i
SCENE NO.
CONFIGURATION
SCENE
CNF5
XXXX
ConfigB
XXX
YES
Load
X
from
X
card
X
to
X
me.
_
0 i
SCENE NO.
CONFIGURATION
SCENE
X
Sure?
XXXXX
No
XXXXX
Yes
Load
X
from
X
card
X
to
X
me.
0 i
SCENE NO.
CONFIGURATION
SCENE
Execute
Load
X
from
X
card
X
to
X
me.
0 i
SCENE NO.
CONFIGURATION
SCENE
Complete
Load
X
from
X
card
X
to
X
me.
0 i
