Yamaha DME24N, Service Manual

Page: 138 / 289

138
DME24N/DME64N
When the DME update is finished, the DME unit will
be automatically restarted. You also need to restart
DME Designer.
[Program]
Updates the DME/CP1 unit program area firmware.
Opens update files with the extension “.DPB”.
1-1-1. Select [Firmware Update]
[Program] in the
[Tools] menu.
The “Open” dialog box will be displayed.
1-1-2. Select an update program with the extension
“.DPB” and click the [Open] button.
The “Firm Update” dialog box will be displayed. The
DMEs in the current zone will be displayed in a list.
1-1-3. Check the DME you wish to update.
You can click on a checkmark to turn it ON/OFF.
The [Select All] button places a checkmark next to
all the DMEs. The [Clear All] button turns OFF all
the DME checkmarks.
1-1. DME FIRMWARE UPDATE
You can update the DME unit firmware using the
[Firmware Update] command on the [Tools] menu.
When you move the mouse cursor over the [Firmware]
command on the [Tools] menu, a submenu is
displayed.
When you select [Program] or [Component] on the
submenu, the “Open” dialog box will be displayed.
You can perform a firmware update by specifying a
firmware update file.
When performing a firmware update, connect the DME
unit and the computer, and do the update online. For
information about the online procedure.
1. Connection with PC
In cases of DME24N, DME64N, and ICP1
· Connect PC with DME24N(64N) with an USB cable.
The USB connector of DME24N (64N) is located on
the left side of the main unit.
·
In cases of DME24N, DME64N.
·
In cases of ICP1.
Fig. 1. Connection with PC
UPDATING THE PROGRAM
USB Cable PC DME24N (64N)
USB Cable
LAN Cable
(cross)
AC adapter
PA-300
LAN Cable
(straight)
ICP1 ADAPTOR BOX
PC
ICP1
DME24N (64N)