Chapter 6
Component Guide
DME Designer Owner’s Manual
333
Delay Short
Delay short components are available with from one to eight outputs. Each has a single input and from
one to eight outputs.
Double-click a component to display the component editor for it. Only the number of outputs in each
component is different. The other parts are the same.
Section
Parameter
Setting Range
Function
1
Delay
All Bypass
ON/OFF
Bypasses from input to output.
2
Input
Level
-
∞
to ±0 dB
Sets the input signal level.
3
Mute
ON/OFF
Mute the input signal.
4
Delay Tap
Delay
ms: 0 to 130
Sample: the range depends
on the Fs value.
Meter: 0 to 44.7
Feet: 0 to 146.5
Frame: the range depends on
the Frame value.
Beat: the range depends on
the Beat value.
Sets the delay time.
There are two edit boxes, displaying
milliseconds and the units selected for [Delay
Scale].
5
Level
-
∞
to ±0 dB
Sets the output signal level for each channel.
6
On
ON/OFF
Turns ON each channel’s delay.
7
Mute
ON/OFF
Turns ON muting for each channel’s output.
8
Delay Scale
Delay Scale
ms
Sample
Meter
Feet
Frame
Beat
Selects the units for setting the delay time.
The selected button will light up, and the
units in the [Delay] edit box will change.
If [Beat] is selected, use the knob to set the
BPM (beats/minute).
1
8
2
3
6
5
4
7
Delay-Short component editor
