Chapter 4
Designer
DME Designer Owner’s Manual
203
“Select Color” Dialog Box
When you click the [Color] or [Label Color] button in an object’s properties dialog box, the “Select
color” dialog box is displayed. Sets the color of objects and text.
■
Setting Basic Colors
There are 48 basic colors provided in the [Basic colors] section. When you select a basic color by
clicking on it, the position of that color in the color palette to the right is indicated by a cross (+).
Information about the selected color is displayed below the color palette.
Click the [OK] button to set the color you selected.
■
Setting Colors That Are Not in the [Basic colors] Section.
You can select any color in the color palette displayed at the upper-right of the dialog box by
clicking on it in the palette. Color information is displayed below the color palette. If you like the
color you selected, click the [OK] button. If you don’t like the color, you can select a new color by
clicking in another location in the color palette, or by dragging the cross symbol to another location
there.
Grey colors can be selected on the tall, thin chart to the right of the palette.
Click the [OK] button to set the color you selected.
■
Saving Colors You Have Created
In the custom color section, you can save up to 16 colors you have created. When you save a
custom color, it can be selected by clicking on its color button, in the same way as for the [Basic
colors].
Even if you open the “Select color” dialog box from the Properties of another object, any custom
color you save will be displayed and you can use that same color for the other object.
