Yamaha DM 2000 Version 2 Owner'S Manual Download | Manualshive

Page: 234 / 403

background image

234

Chapter 19—Pro Tools Remote Layer

DM2000 Version 2—Owner’s Manual

[REC] (WRITE), [ABORT/UNDO] (TOUCH), [AUTOREC] (LATCH),
[RETURN] (READ), [RELATIVE] (TRIM) & [TOUCH SENSE] (OFF) buttons

These buttons are used to select the channel Automation modes. See “Setting the Automa-
tion Mode” on page 250 for more information.

OVERWRITE [FADER] (FADER), [ON] (MUTE), [PAN] (PAN), [AUX]
(SEND), [AUX ON] (SEND MUTE) & [EQ] (PLUG-IN) buttons

These buttons are used to select parameters for automation recording and playback. See
“Arming Parameters for Automation” on page 251 for more information.

USER DEFINED KEYS Section

[DISPLAY] (STATUS) button

This button is used to open and close the Session Setup window.

[1] (TRANSPORT) button

This button is used to open and close the Transport window. Its indicator lights up while
the Transport window is open.

[2] (< BANK) & [3] (BANK >) buttons

These buttons are used to swap channel banks 24 channels at a time.

[4] (SHIFT/ADD) & [5] (OPTION/ALL) buttons

These buttons are used in conjunction with other buttons to modify function operation.
They correspond to the Shift and Option modifier keys found on Macintosh keyboards.

[6] (GROUP) button

This button is used to display group information for all channels. While it’s pressed, the
channel strip displays show the ID of any group in which each channel is assigned.

[7] (SUSPEND) button

This button is used to temporarily suspend all mix groups (not edit groups). Its indicator
flashes while mix groups are suspended.

[8] (CREATE) button

This button is used to open the New Group window (Command-G in Pro Tools).

[9] (MIX/EDIT)

This button is used to toggle between the Mix and Edit windows.

[10] (< CH) & [11] (CH >) buttons

These buttons are used to scroll channels one at a time.

(TRANSPORT)

(STATUS)

( BANK) (BANK ) (SHIFT/ADD)(OPTION/ALL) (GROUP) (SUSPEND) (CREATE)

(MIX/EDIT)

( CH)

(CH )

(CTRL/

CLUTCH)

(Command

ALT/FINE)

(MONITOR) (UNDO)

(SAVE)

USER DEFINED KEYS

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

DISPLAY

«
...
232
233
234
235
236
...
»

Summary of Contents for DM 2000 Version 2




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for DM 2000 Version 2

Brand: ParaBody Pages: 4

Brand: Salvis Pages: 40

Brand: IDEAL Pages: 2

Brand: Modulate Pages: 2

Brand: Bahco Pages: 9

Brand: KaVo Pages: 49

Brand: Easson Pages: 33

Brand: Halyard Pages: 88

Brand: HALDER Pages: 2

Brand: Hällde Pages: 40

Brand: Hällde Pages: 6

Brand: TDR Pages: 8

NTP TECHNOLOGY DAD Thunder Core 256

Brand: DAN Pages: 16

DependaBar DB-18-PCW

Brand: Healthcraft Pages: 13

Brand: Xalingo Pages: 2

INTRA PROPHYwiz 181 P

Brand: KaVo Pages: 22

Brand: Festo Pages: 40

Brand: Neurotech Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands