14
Chapter 3—Macintosh Installation
Studio Manager for DM2000/02R96—Installation Guide
Studio Manager for 02R96
1
Start your Macintosh, and insert the included CD-ROM into your computer’s
CD-ROM drive.
2
Double-click the “SM_” folder on the CD-ROM.
3
Double-click the “02R96” folder.
4
Double-click “Install Studio Manager.”
5
Follow the on-screen instructions to install the software.
Card Filer (DM2000 only)
1
Start your Macintosh, and insert the included CD-ROM into your computer’s
CD-ROM drive.
2
Double-click the “Card_” folder on the CD-ROM.
3
Double-click “Install Card Filer.”
4
Follow the on-screen instructions to install the software.
See the “CardFilerManual.pdf,” which is installed in the same folder as Card Filer, for infor-
mation on using Card Filer.
Setting up OMS
The “OMS Setup for YAMAHA” folder on the included CD-ROM contains OMS studio
setup files for use with the DM2000 and 02R96.
1
Turn off the DM2000/02R96 and use a USB cable to connect the USB TO
HOST port on the DM2000/02R96 to a USB port on your computer.
If you are connecting to the SERIAL TO HOST port, use a serial cable to connect the Printer
or Modem port on your computer.
2
Turn on the DM2000/02R96.
3
Start your Macintosh, and insert the included CD-ROM into your computer’s
CD-ROM drive.
4
Open the “OMS_” folder on the CD-ROM, and then open the “OMS Setup
for YAMAHA” folder.
This folder contains six OMS studio setup files.
•
DM2000-USB
•
DM2000-Modem
•
DM2000-Printer
•
02R96-USB
•
02R96-Modem
•
02R96-Printer
5
Copy the required file to your computer’s hard disk, and then double-click it.
