20
English
3
Chapter
Other Settings
Note:
• To update your Disklavier, you
will need a USB flash memory
with 2GB or more of free space.
• You can also update your
Disklavier using the ENSPIRE
Controller app. To update your
Disklavier using the app, Internet
connection is required.
You can update the Disklavier firmware using USB flash memory.
Download the update program file.
You can download the update program from the following site:
Note:
It is recommended that the USB
flash memory only contains the
update program file.
Copy “en_update.bin” included in the downloaded file to
the root directory of the USB flash memory.
Press the POWER
button to turn the power off.
Connect the USB flash memory to the USB port on the
front of the switch box.
Important:
DO NOT turn the power off or
disconnect the USB flash memory
during update.
Holding the PLAY/PAUSE button, press the POWER
button.
The POWER
indicator flashes, and the Disklavier enters the
update mode.
If any available update program is detected, the Disklavier starts to
update. The update progress is indicated with the VOLUME
indicators.
When the update is complete, the Disklavier restarts automatically.
After the Disklavier restarts, check the firmware version using the
ENSPIRE Controller app.
Updating the Disklavier
1
2
3
4
U
S
B fl
as
h memory
U
S
B port
5
+
Flashing
twice
Summary of Contents for DISKLAVIER ENSPIRE ST/PRO
Page 7: ...English ST PRO Owner s manual ...
Page 39: ...Appendix ST PRO Appendix ...
