manualshive.com logo in svg

Yamaha disklavier DKC-850, Operation Manual, Page: 86 / 88

Share
Download
Yamaha disklavier DKC-850 Operation Manual Download Page 86

Video Synchronization

English

9

Chapter

75

Note:

Be sure to rewind the video cassette 
to locate the beginning of the 
recording. It may take some time 
before piano playback starts if you 
start playback halfway through the 
video.

You can enjoy piano playback with the video recorded on the DVD 
recorder.

Perform the video synchronized recording in advance.

See “Setting for Video 
Synchronized Recording” on 
page 71.

Make sure that the OMNI IN setting is set to “AutoDetect”.

Turn down the volume completely on the TV if you 
connect the audio output of the DVD recorder to the TV.

Turn down the volume completely on the camcorder if you use the 
camcorder only.

Note:

When using the song copied to the 
USB flash memory, it may take 
some time until the Disklavier 
control unit recognizes the 
information for synchronization.

Start playback on the DVD recorder.

Start playback on the camcorder if you use the camcorder only.

The Disklavier control unit automatically searches and selects the 
song paired with the video, and then starts playback as well.

Note:

When searching for songs for video 
synchronized playback from a USB 
flash memory, you can search from 
a maximum of 150 songs per USB 
flash memory. It is therefore 
recommended that you copy songs 
for video synchronized playback 
onto the internal memory. When 
saving onto a USB flash memory, it 
is recommended that you do not 
exceed a total of 150 saved songs 
per memory.

If the piano playing is not synchronized with the video

Adjust the offset time for synchronization. See Chapter 12 “Enhancing the 
Disklavier by Hooking Up Other Devices – Setting the Disklavier Control 
Unit for Audio Data Reception/Transmission” on page 113.

Note:

You cannot operate the Disklavier 
using the front panel or remote 
control during video synchronized 
playback. If you want to stop 
playback of the song, stop playback 
on the DVD recorder (or the 
camcorder).

If noises (synchronized signal) are heard during playback

Turn down the signal level and re-record. See Chapter 12 “Enhancing the 
Disklavier by Hooking Up Other Devices – Setting the Disklavier Control 
Unit for Audio Data Reception/Transmission” on page 113.

Video Synchronized Playback

1

2

3

4

PIANO005.MID

   

   

   

Summary of Contents for disklavier DKC-850

























































































Reviews:

No comments