Instrument an
d
control functions
3-6
3
Oil chan
g
e in
d
icator “OIL CHANGE”
This indicator will come on at the initial
1000 km (600 mi), then at 3000 km
(1875 mi) and every 3000 km (1875 mi)
thereafter to indicate that the engine oil
should be changed.
After changing the engine oil, reset the
oil change indicator and the oil change
tripmeter. To reset them both, select
the oil change tripmeter, and then push
the “RESET” button for one second.
While “OIL CHANGE” is flashing, push
the “RESET” button for three seconds.
The oil change tripmeter will be reset
and the oil change indicator will go off.
If the engine oil is changed before the
oil change indicator comes on (i.e., be-
fore the periodic oil change interval has
been reached), the oil change tripmeter
must be reset for the next periodic oil
change to be indicated at the correct
time.
EAU1234M
Han
d
le
b
ar switches
Left
Ri
g
ht
EAU12401
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12461
Turn si
g
nal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
1. Oil change indicator “OIL CHANGE”
2. Oil change tripmeter
1
2
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
1. Start switch “
”
3
2
1
1
UBW5E0E0.book Page 6 Tuesday, November 22, 2016 4:44 PM
