manualshive.com logo in svg

Yamaha Delight XC115S 2013, Owner'S Manual, Page: 55 / 74

Share
Download
Yamaha Delight XC115S 2013 Owner'S Manual Download Page 55

PERIODIC MAINTENANCE AND ADJUSTMENT

6-21

6

EAU43642

Lubricating the front and rear 
brake levers 

The pivoting points of the front and rear
brake levers must be lubricated at the
intervals specified in the periodic main-
tenance and lubrication chart.

Front brake lever

Rear brake lever

EAU23213

Checking and lubricating the 
centerstand and sidestand 

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.

WARNING

EWA10741

If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or re-
pair it. Otherwise, the centerstand or
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.

ZAUU0720

ZAUU0721

Recommended lubricants:

Front brake lever:

Silicone grease

Rear brake lever:

Lithium-soap-based grease

ZAUU0722

U2EPE0E0.book  Page 21  Thursday, January 2, 2014  11:19 AM

Summary of Contents for Delight XC115S 2013











































































Reviews:

No comments