Yamaha Delight XC115S 2013 Owner'S Manual Download

Page: 25 / 74

INSTRUMENT AND CONTROL FUNCTIONS

3-9

EAU56010

Storage compartments

Front storage compartment

The front storage compartment is locat-
ed at the front of the vehicle. Use this
compartment for small items.

WARNING

EWA16440

●

Do not exceed the load limit of
0.5 kg (1.1 lb) for the front stor-
age compartment.

●

Do not place anything in the
front storage compartment that
will interfere with your operating
the vehicle.

Rear storage compartment

The rear storage compartment is locat-
ed under the seat. Use this compart-
ment for large items. (See page 3-7.)

WARNING

EWAT1051

●

Do not exceed the load limit of 5
kg (11 lb) for the rear storage
compartment.

●

Do not exceed the maximum
load of 156 kg (345 lb) for the ve-
hicle.

NOTICE

ECA10081

Keep the following points in mind
when using the storage compart-
ment.

●

Since the storage compartment
accumulates heat when ex-
posed to the sun and/or the en-
gine heat, do not store anything
susceptible to heat, consum-
ables or flammable items inside
it.

●

To avoid humidity from spread-
ing through the storage com-
partment, wrap wet articles in a
plastic bag before storing them
in the compartment.

●

Since the storage compartment
may get wet while the scooter is
being washed, wrap any articles
stored in the compartment in a
plastic bag.

●

Do not keep anything valuable
or breakable in the storage com-
partment.

TIP

Do not leave your scooter unattended
with the seat open.

1. Front storage compartment

1. Rear storage compartment

ZAUU0695

U2EPE0E0.book Page 9 Thursday, January 2, 2014 11:19 AM

Summary of Contents for Delight XC115S 2013











































































Search results

Summary of Contents for Delight XC115S 2013

Reviews:

Related manuals for Delight XC115S 2013

Brands by name

Popular brands

Yamaha Delight XC115S 2013, Owner'S Manual

Search results

Summary of Contents for Delight XC115S 2013

Reviews:

Related manuals for Delight XC115S 2013

Brands by name

Popular brands