Yamaha DDK-7, Owner'S Manual

Page: 115 / 272

DDK-7 Owner’s Manual 115
Music Data Recorder (MDR)
7
To delete the entered character:
Move the cursor to the character you want to delete.
Press the [DELETE] button at the bottom right in the display.
The character is deleted.
To convert into kanji (Japanese language):
This applies only if you are using the (Kana-Kan) button in Japanese.
When the input “Hiragana” characters are shown in the reverse
display (highlighted), press the
(kanji-conversion) button
one or several times to convert to the characters into the
appropriate kanji.
• The reversed area can be changed by the [
E
][
F
] buttons in the display or
the Data Control dial.
• The converted area can be cleared at once by pressing the (cancel)
button.
To actually enter the change, press the [OK] button or enter the
next character. To enter the hiragana character itself (without
converting it), press the
(delete) button.
1
DATA CONTROL
Cursor
or
A “name is not available” message may appear when you press the [OK] button to
finish entering the name. If this message appears, the name is invalid and you
should enter another name.
The following names cannot be used. (“xx” indicates numbers.)
MDR_xx.EVT ELS_SONG.NAM MDR_xxx.TMP TMP
MDR_xx.MID MDR_xxx.MID REG_xxx.TMP TMP.E02
MDR_xx.Bxx REG_xxx.B00 ELS_SONG.TMP
MDR_xx.Vxx SONG_xxx.C02
SONG.NAM
2
1
2