manualshive.com logo in svg

Yamaha D24, Owner'S Manual, Page: 86 / 211

Share
Download
Yamaha D24 Owner'S Manual Download Page 86

Titling Projects

81

D24—Owner’s Manual

Titling Projects

Projects can be titled for easy identification, and titles can be up to 12 characters long. 
When a titled project is selected, the first nine characters of its title appear on the dis-
play.

1

Select the project that you want to title.

2

Press the [EDIT] button.

The EDIT indicator lights up.

3

Use the JOG/DATA dial to select “PROJECT EDIT,” and then press the [ENTER] 
button.

4

Use the JOG/DATA dial to select “TITLE,” and then press the [ENTER] button.

“PROJECT nn—project title” appears on the display (“nn” and “project title” being the 
number and title of the project to be titled).

5

Use the JOG/DATA dial to select characters, and the SHUTTLE/CURSOR ring 
to move the cursor to the left or right.

The following characters are available:

6

Press the [ENTER] button.

“PROJ TITLE—ARE YOU SURE” appears on the display.

7

Press the [ENTER] button to set the title.

8

Press the [EDIT] button to leave edit.

The EDIT indicator goes out.

0

a E c d e f g h i

i

j k l m

b

n o p q r s t u v w x

z

1 2 3 4 5 6 7 8 9

=

+ - /

[

[

[

[

(     = space)

Summary of Contents for D24




















































































































































































































Reviews:

No comments