Yamaha CS-R10, Systems Setup Manual

Page: 20 / 56

RIVAGE PM10 System Setup Guide
20
SCENE MEMORY section
1 [OVERLAY] key
Press this button to display the OVERLAY SETTING
screen.
While pressing and holding down the [SHIFT] key,
press the [OVERLAY] key to switch Overlay on or
off.
While Overlay is turned on, press and hold down the
[OVERLAY] key to enter Overlay edit mode.
2 [UNDO] key
Cancels the most recent scene operation of storing,
recalling or updating a scene.
After you cancel the operation by pressing the [UNDO]
key, you can “redo” the canceled operation by pressing
the [UNDO] key again.
NOTE
You cannot undo an operation to store a new scene.
3
[UPDATE] key
Updates scene data by overwriting the current scene
(that has been recalled most recently) with the
current mix data.
4
Scene memory display
Indicates the selected scene memory.
5
[PREVIEW] key
Switches Preview mode on or off.
(This feature will be supported by a future update.)
6
[STORE] key
Stores the current scene settings to the selected scene
memory. If you select the existing scene, it will be
overwritten.
7
[INC]/[DEC] keys
Enable you to select the scene number of a scene that
you want to store or recall.
8
[RECALL] key
Enables you to recall a stored scene from scene
memory.
1
3
6
4
2
5
8
7