Yamaha CS-700 Series Integrators Reference Manual Download Page 158

Page: 158 / 166

Yamaha CS-700 Integrators Reference Guide

158

voip.noanswer-

forwarding-num

TEXT

VoIP dialing number.

Forward incoming VoIP

calls to the specified

number if the call is not

answered within the

duration specified in the

'noanswer-delay' attribute.

voip.noanswer-

delay

NUMBER

2..30 : Seconds to

wait before

forwarding a call

Number of seconds to wait

before forwarding an

unanswered incoming call

to the 'noanswer-

forwarding-num' number.

SNMP

The CS-700 includes an SNMP agent that can be configured to provide SNMP support.

The table below describes the SNMP configuration settings that the CS-700 administrator must configure to enable

SNMP.

snmp-enable

Enable or disable SNMP support. Disabled (0) means that SNMP is not

supported. Enabled (1) means that SNMP is available.

snmp-address

Specifies SNMP server address to which traps will be sent. Leave blank to

disable traps.

snmp-community

Specifies the SNMP read-only community string used for queries from the

server and transmitted traps. Read-only indicates the authorization level.

The device does not support write operations initiated through SNMP.

snmp-contact-name

Specifies the contact name, typically the system administrator. This string

is informational and can include an email address. It is not associated with

traps.

snmp-device-location

Specifies the location of the device for informational purposes.

The following read-only properties and traps are supported.

Read-only Properties

•

Serial number

•

MAC address

•

Base FW version

•

USB connection active (0,1)

•

USB microphone audio stream active (0,1)

•

USB speaker audio stream active (0,1)

•

USB video stream active (0,1)

•

Bluetooth connection active (0,1)

•

VoIP call active (0,1)

Summary of Contents for CS-700 Series







































































































































































Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands

Yamaha CS-700 Series, Integrators Reference Manual

Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands