En
13
Preparations
Connect speakers, the antenna, etc. and turn the unit on.
Do not connect the power cord of the unit until you have finished connecting all cables.
Connecting speakers
1
Remove the insulation from the ends
of the speaker cables to expose the
bare wires.
2
Connect speakers to the unit, as the
illustration shows.
•
Prepare speakers, subwoofer and speaker cables
separately.
•
See documentation provided with the speakers
for more information.
Caution
•
If the bare speaker wires touch each other or any metal part of the unit, it could damage the unit and/or the speakers.
•
Use speakers of at least 6 Ω impedance.
Note
•
Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the sound will
be unnatural.
•
You can also connect a subwoofer to the unit (it must have a built-in amplifier).
15 mm (5/8 in.)
1
3
2
SUBWOOFER
OUT
Right speaker
Left speaker
Subwoofer
Monaural pin cable
Speaker cable
