8
En
Make sure you read the following procedure and note carefully before connecting the system. For information on the
speakers (NS-BP200), refer to the owner’s manual supplied with it.
Connecting the system
1
Connect the speaker terminals (L) of the unit to the speaker terminals of the left speaker and the speaker terminals (R)
of the unit to the speaker terminals of the right speaker using the speaker cables supplied with the speaker set (NS-
BP200).
2
Connect the supplied FM antenna to the FM jack.
• Do not connect this unit or other components to the main power until all connections between components are complete.
• Do not let the bare speaker wires touch each other or any metal part of the unit. This could damage the unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be
heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Also,
refer to the owner’s manual for each of your components.
• When connecting speakers other than NS-BP200, use speakers having more than 6
Ω
impedance.
• If there is a problem of weak radio wave reception in your area or you want to improve radio reception, we recommend that you use
commercially available outdoor antennas. For details, consult the nearest authorized Yamaha dealer or service center.
PREPARATIONS
Connecting speakers/external components/antennas
CAUTION
Notes
DVD player etc.
Subwoofer
Right speaker
(NS-BP200)
Left speaker
(NS-BP200)
CD Receiver (CRX-550)
Portable
player
RCA stereo
cable
3.5mm stereo
mini plug cable
Be sure to remove insulation from
the end of each speaker cable.
