46
CP4 STAGE/CP40 STAGE Owner’s Manual
Quick
Start G
u
id
e
Using the following procedure, you can configure
external control on an individual Performance basis:
1
Select the Performance you would like to use
(page 30).
2
Press the [EDIT] button.
The Edit menu will be displayed.
3
Use the [
u
] and [
d
] buttons to select
03: Master Keyboard
, and then press the
[ENTER] button.
The Master Keyboard screen’s Common pane will be
displayed, and this applies to all zones.
4
Use the [+1/YES] button to set the
MasterKbdSw
parameter to “on”.
This action activates all four zones.
5
Use the [
d
] button to move to panes for
specific zones.
The zone setting parameters will be displayed.
NOTE
To jump to the corresponding pane for other zones, hold
down the [SHIFT] button and press the [
d
] or [
u
]
button.
6
To use the current zone, set the
ZoneSw
parameter to “on”.
7
Move the cursor (
R
) to the
Channel
parameter using the [
r
] button, and then
select a MIDI transmit channel for the current
zone using the Data Dial.
8
Use the [
d
] button to move to the other
panes, and if necessary, set other parameters
for the current zone using the [
l
] and [
r
]
buttons and the Data Dial.
NOTE
For more details on zone parameters, refer to the
Reference Manual
(pdf).
9
Hold down the [SHIFT] button and press the
[
d
] button to jump to the corresponding pane
for other zones.
Repeat Steps 6 to 8 for all required zones.
10
When you have finished setting zones,
press the [EXIT] button the required number
of times.
The Performance screen will be displayed.
11
For each zone configured to play another
device, set the MIDI receive channel on the
corresponding device to match the zone’s
transmit channel from Step 7 above.
EDIT
D
01:Common
E
MasterKbd
Common
MasterKbdSw
E
R
off
D
MasterKbd
Common
MasterKbdSw
E
R
on
D
MasterKbd
Zone1
ZoneSw Channel
E
R
on
1
W
Zone set using the current pane
MasterKbd
Zone1
Octave Trnsps
E
R
+0
+ 0
W
Zone parameter
Tip
MIDI transmit and receive channels
When the Master Keyboard function is not activated,
control of other MIDI devices is performed using the
Parts’ individual MIDI transmit channels. The Parts
making up each Performance have the following fixed
MIDI transmit channels:
• CP4 STAGE
MAIN Part: 1; LAYER Part: 2; SPLIT Part: 3
• CP40 STAGE
MAIN Part: 1; SPLIT/LAYER Part: 2
In order to control another MIDI device using your
stage piano, you will need to set its MIDI receive
channel to one of the above stage-piano transmit
channels as appropriate. For details on how to do this,
refer to the owner’s manual that came with the MIDI
device.
Summary of Contents for CP4 Stage
Page 1: ...EN Owner s Manual STAGE PIANO ...
Page 59: ......