Yamaha CP1 Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 80

background image

About the accessory disk

68

CP1 Owner’s Manual

A

p

pendix

About the accessory disk

SPECIAL NOTICE

• The software included in the accessory disk and the copyrights thereof are under exclusive ownership by Steinberg

Media Technologies GmbH.

• Use of the software and this manual is governed by the license agreement which the purchaser fully agrees to upon

breaking the seal of the software packaging. (Please read carefully the Software Licensing Agreement on page 69
before installing the application.)

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without

the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot

be held responsible for the results of the use of this manual and the software.

• This disk is NOT for audio/visual purpose. Do not attempt to play the disk on an audio/visual CD/DVD player. Doing so

may result in irreparable damage to your player.

About the DAW software in the accessory disk

The accessory disk contains DAW software both for Windows and Macintosh.

NOTE •

Make sure to install DAW software under the “Administrator” account.

•

In order to have continuous use of the DAW software in the accessory disk, including support and other benefits, you will need to register the
software and activate your software license by starting the software while the computer is connected to the Internet. Click the “Register Now”
button shown when the software is started, then fill in all required fields for registration. If you do not register the software, you will be unable to
use it after a limited period of time expires.

•

If you are using a Macintosh computer, double-click the “***.mpkg” file to start installation.

For information about the minimum system requirements and latest information on the software in the disk, check the web
site below.
<http://www.yamahasynth.com/>

About software support

Support for the DAW software in the accessory disk is provided by Steinberg on its website at the following address.
http://www.steinberg.net

You can visit the Steinberg site also via the Help menu of the included DAW software. (The Help menu also includes the
PDF manual and other information on the software.)

IMPORTANT

Note that Yamaha does not offer technical support for the DAW software in the accessory disk.

«
...
66
67
68
69
70
...
»

Summary of Contents for CP1

















































































Reviews:

No comments

Related manuals for CP1

Brand: Hammond Pages: 754

Brand: Kanomax Pages: 2

Brand: Keithley Pages: 156

Brand: TA Pages: 58

Brand: Eaton Pages: 43

Brand: Unico Pages: 10

Brand: Oakton Pages: 69

Brand: Olympus Pages: 4

Brand: jenway Pages: 52

Brand: Keysight Pages: 92

Brand: BGS technic Pages: 16

Brand: Trotec Pages: 8

350 Maritime V2

Brand: TESTO Pages: 106

Brand: Leutert Pages: 8

Brand: WIKA Pages: 56

MASTERVISION ECO

Brand: Ega Master Pages: 48

Brand: IMI Hydronic Pages: 48

Brand: Kustom Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands